Discussion:
Canon lide 25
(too old to reply)
c***@REMOVEbundy.co.uk
2011-07-20 14:43:13 UTC
Permalink
Has anyone got this scanner to work with windows 7 64 bit.

I'm struggling and could with some help



Chris
Chris
2011-07-20 18:01:02 UTC
Permalink
Post by c***@REMOVEbundy.co.uk
Has anyone got this scanner to work with windows 7 64 bit.
I'm struggling and could with some help
Chris
Works fine for me... have you downloaded the Win 7 64-bit drivers from
the Canon site?

Chris (a different one!)
c***@REMOVEbundy.co.uk
2011-07-21 05:25:10 UTC
Permalink
On Wed, 20 Jul 2011 19:01:02 +0100, Chris <***@anywhere.com> wrote:

Yes have got drivers , but they appear quite old 2006.

What software are you using ?

Chris
Post by Chris
Post by c***@REMOVEbundy.co.uk
Has anyone got this scanner to work with windows 7 64 bit.
I'm struggling and could with some help
Chris
Works fine for me... have you downloaded the Win 7 64-bit drivers from
the Canon site?
Chris (a different one!)
Chris
2011-07-21 22:41:46 UTC
Permalink
Post by c***@REMOVEbundy.co.uk
Yes have got drivers , but they appear quite old 2006.
What software are you using ?
Chris
Try these:

http://www.canon.co.uk/Support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_25.aspx?DLtcmuri=tcm:14-742704&page=1&type=download

and

http://www.canon.co.uk/Support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_25.aspx?DLtcmuri=tcm:14-742684&page=1&type=download

They are the latest, and date from 2010. They're the ones I'm
currently using.

Chris.
c***@REMOVEbundy.co.uk
2011-07-22 08:50:28 UTC
Permalink
On Thu, 21 Jul 2011 23:41:46 +0100, Chris <***@anywhere.com> wrote:

Thank you I have loaded drivers ok, the scanner is seen in devices,
but in the canoscan toolbox my scanner is not seen any ideas ?

Chris
Post by Chris
Post by c***@REMOVEbundy.co.uk
Yes have got drivers , but they appear quite old 2006.
What software are you using ?
Chris
http://www.canon.co.uk/Support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_25.aspx?DLtcmuri=tcm:14-742704&page=1&type=download
and
http://www.canon.co.uk/Support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_25.aspx?DLtcmuri=tcm:14-742684&page=1&type=download
They are the latest, and date from 2010. They're the ones I'm
currently using.
Chris.
Chris
2011-07-22 20:45:23 UTC
Permalink
Post by c***@REMOVEbundy.co.uk
Thank you I have loaded drivers ok, the scanner is seen in devices,
but in the canoscan toolbox my scanner is not seen any ideas ?
Chris
Is it attached to a USB port on the PC itself? ISTR they're not very
happy on USB hubs (not even powered ones).

Does it appear under Imaging devices in Device Manager (Control Panel
-> Administrative Tools -> Computer Management -> Device Manager)? Try
'scan for hardware changes'.

Chris
c***@REMOVEbundy.co.uk
2011-07-22 21:13:07 UTC
Permalink
On Fri, 22 Jul 2011 21:45:23 +0100, Chris <***@anywhere.com> wrote:

Appears under imaging devices in device manager and reports all
working. connected directly to the PC.

When I turn the pc on, the Scanner clicks and the bar moves a little.
its seen by the PC OK , not by the canoscan toolbox or by the scan
program that is part of windows 7.

Chris
Post by Chris
Post by c***@REMOVEbundy.co.uk
Thank you I have loaded drivers ok, the scanner is seen in devices,
but in the canoscan toolbox my scanner is not seen any ideas ?
Chris
Is it attached to a USB port on the PC itself? ISTR they're not very
happy on USB hubs (not even powered ones).
Does it appear under Imaging devices in Device Manager (Control Panel
-> Administrative Tools -> Computer Management -> Device Manager)? Try
'scan for hardware changes'.
Chris
Chris
2011-07-23 16:03:50 UTC
Permalink
Post by c***@REMOVEbundy.co.uk
Appears under imaging devices in device manager and reports all
working. connected directly to the PC.
When I turn the pc on, the Scanner clicks and the bar moves a little.
its seen by the PC OK , not by the canoscan toolbox or by the scan
program that is part of windows 7.
Chris
Hmm - not sure what else to suggest. The clicking and moving on
boot-up is hopeful, as mine does that, too. Oddly, Windows Fax & Scan
doesn't find my scanner, but CanoScan Toolbox certainly does.

The only other thing I can think of is to download the trial version
of Vuescan (www.hamrick.com) - and see if that recognises your
scanner. Again, like CanoScan, it works fine with my scanner.

Chris.
c***@REMOVEbundy.co.uk
2011-07-24 07:28:50 UTC
Permalink
On Sat, 23 Jul 2011 17:03:50 +0100, Chris <***@anywhere.com> wrote:

What version of toolbox are you using, im trying to use 5.0

Chris
Post by Chris
Post by c***@REMOVEbundy.co.uk
Appears under imaging devices in device manager and reports all
working. connected directly to the PC.
When I turn the pc on, the Scanner clicks and the bar moves a little.
its seen by the PC OK , not by the canoscan toolbox or by the scan
program that is part of windows 7.
Chris
Hmm - not sure what else to suggest. The clicking and moving on
boot-up is hopeful, as mine does that, too. Oddly, Windows Fax & Scan
doesn't find my scanner, but CanoScan Toolbox certainly does.
The only other thing I can think of is to download the trial version
of Vuescan (www.hamrick.com) - and see if that recognises your
scanner. Again, like CanoScan, it works fine with my scanner.
Chris.
Chris
2011-07-24 17:38:15 UTC
Permalink
Post by c***@REMOVEbundy.co.uk
What version of toolbox are you using, im trying to use 5.0
Chris
The shortcut to mine says it's 4.9 - but whatever, it's what I
downloaded from the Canon when I installed Win 7 64 bit. (And that
was only a couple of months ago.)

Chris.

Loading...